Metals & Alloys

Bering Yachts delivers first BC60 aluminium explorer catamaran

Sienna VossOctober 26, 20265 min read15 views

At a glance

  • The 18.9-metre twin-hull explorer combines long-range fuel capacity with an all-aluminium displacement platform.
  • Bering Yachts has delivered and launched the first BC60, an 18.9-metre aluminium explorer catamaran designed for more than 3,500 nautical miles of range at 8 knots. The vessel applies the yard's long-range explorer approach to a twin-hull layout with an enclosed flybridge and systems arranged for extended autonomy.
A large aluminium expedition catamaran with a low enclosed flybridge moves across open water in a conceptual editorial illustration.

Bering Yachts has presented the first hull of its BC60 aluminium explorer catamaran, a delivered and afloat vessel that moves the shipyard onto a twin-hull platform while keeping the long-range and structural priorities of its existing explorer range. Founder and CEO Alexei Mikhailov gave a walkthrough of the design and onboard systems.

The BC60 measures 18.9 metres overall with an 8.6-metre beam. It is laid out as a displacement explorer, not a high-speed production catamaran. All-aluminium construction, a shallow draft and substantial fuel capacity are intended to support extended passages and greater autonomy at sea.

Range and tankage

The catamaran has a draft of 1.58 metres and carries more than 13,500 litres of fuel. That supports a range of over 3,500 nautical miles at a cruising speed of 8 knots. Fresh-water capacity is approximately three cubic metres, while grey-water and black-water tanks each hold 1,500 litres.

Mikhailov linked the design to the yard's earlier B72 and B88 models, citing range, reliability, quiet running and the ability to remain self-sufficient for extended periods. Those characteristics, he said, had been applied to a catamaran platform. He described the BC60 as a displacement exploration machine rather than a leisure catamaran.

Engine-room and noise isolation

The twin-hull layout uses unusually deep sponsons to house a two-level engine-room arrangement. This provides accessible space for generators, watermakers, sewage-treatment equipment and other systems. The arrangement also helps separate noise and vibration from living areas, supporting comfort on longer passages. Protected running gear and attention to structural integrity form part of the safety-oriented design.

The aluminium construction and resulting weight distribution allow a fully enclosed flybridge that serves as a second salon. On the main deck, the salon includes a full helm station with 360-degree visibility. A professional galley is arranged on both sides of the space for practical use underway.

Accommodation and working spaces

The master cabin has space to walk around the bed, panoramic windows, a walk-in wardrobe and an en-suite bathroom with a full shower. The opposite sponson holds two guest cabins, each with its own bathroom. A dedicated crew cabin, laundry and pantry areas, additional refrigeration and extensive storage are also included. These features are intended to support extended stays, whether the catamaran is owner-operated or run by a small professional crew.

The enclosed flybridge has a bar, refrigeration, a day bathroom and 360-degree visibility. It can be configured as a lounge, gym or office, adding flexibility for life and work at sea. Mikhailov highlighted low sound and vibration levels at cruising speed, along with storage and onboard systems intended to support self-sufficiency on long passages.

The first hull's delivery and launch put Bering's twin-hull explorer concept into the water. With its range, shallow draft and aluminium construction, the BC60 combines long-range explorer requirements with the additional space of a catamaran platform.

Reported by Sienna Voss, Fenestration and Facade Specialist.