Industrial Machinery

Fives HPM Positions RoboTDM as Robotic Machining Alternative for Large Parts

Ingrid VermeulenOctober 29, 20265 min read15 views

At a glance

  • The Liné Machines RoboTDM applies a calibrated industrial robot and configurable spindle end effector to milling, trimming and drilling on oversized workpieces.
  • Fives HPM is offering the Liné Machines RoboTDM as a robotic machining option for large parts where tolerances around 0.1 mm are sufficient. The system combines robot calibration and motion-planning software with configurable spindle tools, and Fives reports cycle-time reductions of up to 70% in trimming and milling during development trials.
An industrial robot arm with a spindle end effector works on a large composite panel in a manufacturing cell.

Fives HPM's Liné Machines RoboTDM is a high-precision robotic machining system intended to mill, trim and drill large workpieces without placing them inside a large CNC machine tool.

The company says the approach is suited to applications where tolerances down to about 0.1 mm are acceptable. In those cases, it argues, a large CNC machine can add cost and footprint beyond what the part actually needs. RoboTDM is intended to bring the cutting tool to the workpiece, reducing setup and programming effort while providing layout flexibility.

From robot accuracy to machining accuracy

Conventional industrial robots have typically achieved positional tolerances of around 0.3 mm, a level that is insufficient for many machining applications. Fives says its development work for RoboTDM focused on closing that gap through high-precision robotic machining. The system combines robot calibration with look-ahead and motion-planning algorithms capable of processing programs with more than one million points without introducing latency that could compromise motion.

According to Fives, the result is smoother trajectory execution and support for multi-axis contouring and complex machining operations more closely comparable with CNC machining. RoboTDM can reduce machining deviation by up to 100 micrometers (0.1 mm), which the company describes as a threefold improvement over conventional robotic accuracy.

Configurable tooling and processes

The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Available systems can provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. The system can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling applications.

RoboTDM is not limited to spindle machining. Fives says the platform can be configured for waterjet cutting, laser profiling and ultrasonic cutting. It can also be set up with multiple workstations and customized peripheral equipment. Its relatively modest foundation requirements are intended to simplify installation compared with a large CNC machine tool.

Applications and limits

Potential operations include face milling and deburring, such as removing burrs from castings and trimming excess weld beads. The system can also drill pilot holes in large aerospace panels or automotive body parts, and perform trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications. Fives identifies aerospace, defense, maritime and energy as sectors where large component dimensions and variable production requirements may make the approach attractive.

The company does not claim the system covers every machining challenge. Where tolerances tighter than 0.1 mm are required, a high-precision CNC machine remains the appropriate choice. Fives describes RoboTDM as complementary to Liné Machines and the wider Fives HPM portfolio of high-precision machine tools.

Development and manufacturing base

Fives says development trials spanning several years have demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. The RoboTDM development originated from customer requirements, according to the company, and reflects an approach of engineering solutions around specific manufacturing challenges rather than forcing applications to fit standard equipment.

Fives Liné Machines Inc, now part of Fives HPM, has had a North American presence for almost 50 years through its facility in Granby, Quebec, Canada. The plant produces Liné CNC machine tools and robotic solutions, including RoboTDM. The site also supports engineering, integration, automation, service and training across equipment lifecycles.

Reported by Ingrid Vermeulen, Surface Treatment, Dimensional Quality and Sourcing Editor.