High strain rate testing can supply material data intended to make simulation models more representative of real loading conditions, according to Andrea Incardona, application engineer and product specialist at testing machine manufacturer Instron, who set out the case in an article on how dynamic characterisation feeds simulation, material selection and product development.
Incardona's starting point is that simulation is used to predict how materials and components behave under different loading conditions, so that designs can be assessed before physical prototypes are committed. The worth of those predictions, the article argues, depends on how accurately the model represents the material itself.
Why quasi-static data can fall short
Many materials show strain-rate-dependent properties: their mechanical response changes as loading speed increases. A material characterised under quasi-static conditions may therefore respond differently when it meets a rapid impact or crash event.
The article cites a 2025 study published in the SAE International Journal of Materials and Manufacturing, "Influence of Strain Rate Effect on Mechanical and Crashworthiness Properties of CFRP Composite Structures". According to Incardona, the study found that incorporating strain-rate-dependent material properties into crash simulations reduced the gap between simulated and experimental results: the discrepancy in peak acceleration fell by 6.5 per cent, while mean acceleration and displacement discrepancies fell by 5.9 per cent and 6.3 per cent respectively.
Depending on the material, specimen geometry and test method, materials can be characterised from quasi-static conditions up to strain rates approaching 1,000/s, which the article says gives engineers a broader picture of how properties shift as loading becomes faster. Individual tests can last only 3 to 10 milliseconds, placing demands on the data acquisition used to capture the response.
Material selection and weight trade-offs
Conventional strength and stiffness data do not necessarily show how a material will respond when loading becomes rapid, and two materials that appear comparable in conventional testing may diverge under high strain rate conditions. Characterising dynamic behaviour allows engineers to consider how each candidate deforms, absorbs energy and ultimately fails under conditions relevant to the application.
That becomes more important where performance has to be balanced against weight. Automotive crash structures and aerospace components are given as examples in which understanding dynamic material behaviour can inform both material selection and component design.
Bringing data into development
In the development process described, material behaviour is measured, incorporated into simulation, used to compare design options and then validated through physical testing. On this account, testing moves beyond a final check on an existing design: dynamic data can be used earlier to judge whether a material is suitable, refine a component design and see how changes may affect performance.
Instron says its high strain rate testing systems support data acquisition at up to 200 kHz, while digital image correlation (DIC) can provide additional information about strain development across the specimen, and analysis tools support data processing and theoretical modelling.
The closing argument is that material data is only as useful as its relevance to the conditions a component will actually face, and that capturing behaviour at loading rates closer to those in service is intended to support decisions running from simulation through to product development.
