Industrial Machinery

KraussMaffei Extrusion Introduces Single-Stage PVC InlineMixing for Roofing Membranes

Maren OstergaardNovember 17, 20265 min read5 views

At a glance

  • The continuous process eliminates the separate heating-cooling mixer, and the company reports energy cost reductions of up to 75 percent depending on formulation, system parameters and site.
  • KraussMaffei Extrusion has developed PVC InlineMixing, a continuous single-stage extrusion process that replaces batch dry-blend preparation for PVC roofing membranes with direct gravimetric feeding into a twin-screw extruder. The company says the approach can cut energy costs by up to 75 percent and is already running on an industrial line with a total throughput of 1,800 kg/h.
Cutaway illustration of a continuous extrusion line in which overhead feeders dose PVC powder and additives directly into a twin-screw extruder, with calender rolls downstream forming a roofing membrane sheet.

KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that replaces the conventional two-stage route with a continuous line. The Laatzen-based machinery maker announced PVC InlineMixing on November 17, 2026, describing it as a way to lower energy costs, shorten production time and enable a rapid return on investment for the system.

In the established two-stage process, PVC powder, plasticizers, additives and fillers are first processed batchwise in a separate hot-cold mixer combination to produce a dryblend. After cooling and intermediate storage, the mixture is plasticized in a twin-screw extruder and formed into membranes.

Direct feeding replaces batch premixing

PVC InlineMixing removes the separate mixing step. All solid and liquid components are fed directly into the extruder by gravimetric dosing systems in exactly the quantities required. Because there is no separate heating-cooling-mixing combination to invest in, and the material is heated only once, the company reports that energy consumption and energy costs fall by up to 75 percent, depending on the formulation, the system parameters and the location.

Removing the batch mixer also reduces the space required for the overall system and cuts labor costs. Maintenance is lower as well, since wear parts for the heating-cooling mixer are no longer needed. KraussMaffei summarizes the effect as lower capital expenditure (CAPEX) and lower operating costs (OPEX), which it says improves overall cost-effectiveness and creates the conditions for a quick return on investment. Staffing requirements are also described as significantly lower than for a system built around dry-blend premixing.

Formulation changes during operation

The continuous concept is also intended to make production more flexible. According to the company, formula adjustments and color changes can be implemented directly during operation through the integrated control system, so that time-consuming preparation and interim storage of separate dryblend batches drop out of the sequence.

"For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing," said Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion. Manufacturers could respond more quickly to new requirements and adjust formulations directly during the production process while reducing energy and capital expenditure, he added.

Validated on a ZE 65 BluePower

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated using industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The BluePower series has a Da/Di ratio of 1.65; the combination of high torque and large free volume is intended to provide a wide process window for processing different formulations.

According to KraussMaffei, the tests confirmed high gelation levels of the PVC and high product quality, and the mechanical properties and weldability of the membranes met industrial requirements across several formulations. "The results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production," Bartel said, noting that customers can test their own formulations under production-relevant conditions at the Technology Center, optimize the process there and establish the basis for industrial implementation.

Already running at 1,800 kg/h

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders; PVC, additives and fillers, together with the resulting edge trimmings, are processed continuously and directly into finished membranes.

Reported by Maren Ostergaard, Earthmoving Equipment Analyst.