SinceVision has added the SGI-N030W to its SGI Series, introducing a wide-spot laser displacement sensor for high-speed, non-contact dimensional measurement. The company is targeting rough, textured and irregular surfaces, where conventional point-spot laser systems can produce unstable readings as surface finishes vary.
Wide-spot optical approach
Conventional point-spot sensors concentrate reflected laser energy on a small area. Microscopic scratches, grain boundaries, brushed textures or matte finishes can then create signal variations that the system may interpret as dimensional changes. SinceVision says this can lead to false defect warnings and additional inspection.
The SGI-N030W instead uses an expanded laser spot with optical triangulation. It collects reflected light across a broader surface region and averages microscopic peaks and valleys before signal conversion. According to the company, this reduces the influence of surface roughness and optical scattering, improving stability on drawn metals, sandblasted surfaces and coated battery foils. The sensor extends SinceVision's SGI Series portfolio and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering.
Specified performance and interfaces
SinceVision specifies a 30 mm reference distance and a measurement range of ±5 mm. On a diffuse white target under static conditions, repeatability is 0.05 µm, with linearity of ±0.02% of full scale. Sampling runs at 50 kHz, equivalent to a 20 µs update interval. Communications include RS485 and 100Base-TX Ethernet, plus switchable analogue output using 4–20 mA current or 0–10 V voltage. A master-slave synchronisation function allows two sensors to face each other and measure from opposite sides of a component or moving material.
Battery electrode thickness
One target application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material. Periodic spot checks also leave gaps in coverage across a production reel.
In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure clearance to the material, and a controller combines those readings with a fixed mounting datum to calculate absolute thickness in real time. SinceVision reports production trials showing stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide longitudinal resolution for detecting local coating agglomerations, edge thinning and exposed substrate before cell winding.
Other industrial uses
For semiconductor manufacturing, the non-contact sensor is proposed for wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor voice coil motors, linear actuators and micro-steppers. The sampling rate supports capture of transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot; position data can go to machine control systems over Ethernet for real-time monitoring and process control.
Jack Li, SinceVision's global sales and marketing director, says surface texture remains a recurring source of false defect warnings in battery manufacturing and precision assembly. He says point-beam sensors can read microscopic scratches and rough coatings as thickness changes, slowing production lines and requiring manual inspection. The SGI-N030W's wider spot is designed to average those variations, while synchronisation between opposing sensor heads supports high-speed thickness verification.
